AIM Firestop Blocks are made from high density Rockwool stone wool. Incorporated into the building during construction, they are used to seal apertures and are permanently held in place by compression. They can also be used within metal cladding as a fire break and to protect the top flange of steel beams.SPECIFICATIONMinimum block length: 50mmNo mastics or sealants requiredTested to BS 476 part 20 and assessed by Warrington Fire Research CentreOzone depletion potential of zero, no CFCs or HCFCs used in manufactureGlobal warming potential = zeroAPPLICATIONComposite flooring profilesDovetail composite flooring profilesMetal decking, roofing and claddingFIRE PERFORMANCEFire ResistanceMinimum Length of Fire Stop Block mmMinutesHeight up to 75mmHeight 76mm -> 300mm30505060607512075100240100 EHD*100 EHD**EHD = Extra high density barrier, EHD is not required for dovetail blocksLength relates to the amount of fire stopping material required between one compartment to the next. The total length may be made up from two shorter blocks (i.e. two 50mm long blocks inserted either side of the wall or partition equate to a 100mm fire seal). The minimum length of block available is 50mm.ACOUSTICSWhen installed above a partition and where an imperforate 12.5mm plasterboard ceiling is installed to abut the partition below on both sides, the room-to-room sound reduction, on the path of the AIM Fire Stop Block, will be at least 47dB average sound reduction index.INSTALLATIONAIM Fire Stop Blocks are push fitted into place; they must fit tightly and completely. Dovetail fire stops are supplied as rectangular blocks, which are pinch fitted into the profile, then pushed into place.AIR LEAKAGEAIM ablative coated fire stop blocks provide a robust solution to air leakage requirements. These are available to suit most major cladding and decking profiles.*Price on application* Please contact us for the best prices.
