150mm Superglass Superwall 32 Cavity Wall Insulation Batt – (2.18m2)

Superglass Superwall 32 is a British Board of Agrément (BBA) approved, non-combustible and water repellent glass mineral wool insulation cavity wall batt. The fl exible batt is supplied at 455mm wide to allow easy installation between standard vertical wall tie spacings and minimum on-site cutting and waste.ApplicationSuperglass Superwall 32 is designed to provide thermal insulation in full or partial fill in new external masonry cavity walls, up to 25 metres in height for full fill and without restriction for partial fill, in new buildings of a domestic and non-domestic nature (additional requirements apply for buildings above 12 metres in height for full fill and above 25 metres in height for partial fill). Superwall 32 is BBA approved for use in all UK exposure zones (subject to conditions detailed in the BBA Certificate and NHBC Standards).Key Features:Thickness: 150mmSlab size: 1200 x 455mmSheets: 5 slabs per packCoverage: 2.18m2 per packThermal Conductivity: 0.032 W/mKCertification: Manufactured in accordance with BS EN 13162:2012, BS EN 13172:2012 & BS EN ISO 9001:2015Thermal PerformanceDeclared thermal conductivity of 0.032W/mK.Fire PerformanceAll Superglass products are deemed non-combustible and have a fire classification of A1 (the highest possible rating) when tested to BS EN 13501-1 Reaction to Fire.EnvironmentManufactured in accordance with ISO 14001:2015 Environmental Management Systems.Zero Ozone Depletion Potential & zero Global Warming Potential.CFC & HCFC free.Generic BRE Green Guide Rating of A .Recycled ContentManufactured from up to 84% recycled glass which would otherwise go to landfill.StandardsManufactured in accordance with:BS EN 13162:2012( A1:2015) Thermal insulation products for buildings Factory made mineral wool (MW) products.BS EN 13172:2012 Thermal insulation products Evaluation of conformity.BS EN ISO 9001:2015 Quality Management Systems (QMS).Water ResistanceConstructions incorporating the product and built in accordance with the Standards listed in section 4.4 of BBA Certificate 89/2231 Product Sheet 3 , will resist the transfer of precipitation to the inner leaf and satisfy the national Building Regulations.NHBC StandardsIn the opinion of the BBA, Superwall 32 Cavity Wall Batt, if installed, used and maintained in accordance with BBA Certifi cate 89/2231 Product Sheet 3, can satisfy or contribute to satisfying the relevant requirements in relation to NHBC Standards, Chapter 6.1 External masonry walls.Handling & StorageSupplied compression packed in polythene to provide short term protection. For long term protection, the product must be stored indoors or under a waterproof covering in order to protect against weather damage. Should not be left permanently exposed to the elements.